检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
Can an ECS with Application Systems Be Backed Up? Yes. CSBS supports application-consistent backup. For details about compatibility, see Table 1.
Can an ECS with Application Systems Be Backed Up? Yes. CSBS supports application-consistent backup. For details about compatibility, see Table 1.
Figure 1 Error message displayed in a VNC-based remote login Possible Causes The ECS is abnormal. Another user has logged in to the ECS. No operations are performed on the ECS and it is automatically disconnected. Troubleshooting Log in to the ECS again using VNC.
For details about how to obtain the ID, see Obtaining a Project ID. server_id Yes Specifies the ECS ID in UUID format. Request None Response Table 2 describes the response parameters.
Locate the row that contains the ISO image and click Create ECS in the Operation column. The created ECS is for temporary use only and needs to be deleted when you are finished with it. The system creates a pay-per-use ECS with fixed specifications.
Why Does My Unsubscription from ECS Fail After I Unsubscribe from MRS? Question Why Does My Unsubscription from ECS Fail After I Unsubscribe from MRS? Answer Check that the ECS ID is not used by an MRS cluster in use.
What Should I Do If Attaching a Disk to a Windows ECS Failed But There Are Still Available Device Names? Symptom On the Windows ECS details page, the system displays a message indicating that at most n more disks can be attached to the ECS.
If the local host communicates with the ECS using NAT, this problem may occur. Run the following command to check whether tcp_tw_recycle is enabled on the ECS: sysctl -a|grep tcp_tw_recycle If the value of tcp_tw_recycle is 1, the function is enabled.
Why Does My Unsubscription from ECS Fail After I Unsubscribe from MRS? Check that the ECS ID is not used by an MRS cluster in use. On the ECS console, find the ECS to be unsubscribed from and click Locked by MRS to unlock it. Click Unsubscribe again.
Figure 3 Enabling TCP/IP NetBIOS Helper Parent topic: Windows ECS Issues
Why Is the ECS IP Address Released After the System Time Is Changed? Possible Causes If the new ECS system time is later than the DHCP lease expiration time, the system will attempt to renew the DHCP lease. If the renewal fails, the IP address will be released.
If the active ECS goes down, the standby ECS becomes the active ECS and continues to provide services. Notes and Constraints All servers of the HA cluster must be in the same subnet.
If you set the name of an ECS to ecs01, you can create a private zone for ecs01 and add an A record to map ecs01 to the private IP address of the ECS so that the ECS can be accessed using its host name. Procedure Go to the Private Zones page. Click Create Private Zone.
Interface of the ECS Step 5: Check Whether Required Security Group Rules Have Been Configured Step 6: Check Whether Traffic from the ECS Subnet Is Blocked Step 1: Check Whether the ECS Is Running Properly Check the ECS status.
How Do I Migrate an ECS to a Different Region of Another Account? You can perform the migration in either of the following ways: Use the ECS to create a private image, migrate the image to a different region of another account, and then use the image to create a new ECS.
Services are deployed on ECS 1 and ECS 2, and a third-party firewall is installed on ECS X. Traffic from ECS 1 and ECS 2 needs to be filtered by the firewall of ECS X. Fault Locating The issues here are described in order of how likely they are to occur.
- User Data Enables an ECS to automatically inject user data when the ECS starts for the first time. This configuration is optional. If this function is enabled, the ECS automatically injects user data upon its first startup. For details, see Elastic Cloud Server User Guide.
What Should I Do If a SAP Application on an ECS Cannot Be Started? Symptom The /etc/hosts file contains "127.0.0.1 host name host name". As a result, the SAP application installed on the ECS cannot be started.
After the EVS disk is attached to the ECS, you need to initialize the disk before you use it. Sample Code https://github.com/huaweicloud/terraform-provider-huaweicloud/blob/master/examples/ecs/attached-volume/main.tf Parent topic: Elastic Cloud Server (ECS)
What Are the Impacts If I Do Not Pre-configure an ECS Used to Create a Private Image? Before using an ECS or external image file to create a private image, you need to pre-configure the ECS or the source VM of the image file.
