检测到您已登录华为云国际站账号,为了您更好的体验,建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
Default Gateway Default gateway corresponding to the new IP address. NOTE: Ensure that the default gateway is globally unique. Figure 6 Adding an IP address Configure the DNS address for the internal network.
Open the cmd window and enter the ipconfig command to check the IPv4 address, subnet mask, and default gateway of the wireless network connected to the PC. The IPv4 address is the network segment of the router connected to the PC.
Default Gateway Default gateway corresponding to the new IP address. NOTE: Ensure that the default gateway is globally unique.
Figure 1 Checking the default gateway If no default gateway exists, go to the next step. If the default gateway exists, perform the following operations: Click Modify in the Operations column.
If you connect the router to a wireless network, the default gateway will be automatically deleted. If you connect the router to a wired network again, you need to configure the default gateway.
If you use a wireless network, the default gateway will be automatically deleted. You need to reconfigure the default gateway when you plan to use a wired network for connection. It is recommended that you use a wireless network.
The IP address of the router gateway cannot be set to xxx.xxx.0.xxx, for example, 192.168.0.1. In addition, the router gateway and the HiLens Kit device cannot be in the same network segment.
If you connect the router to a wireless network, the default gateway will be automatically deleted. If you connect the router to a wired network again, you need to configure the default gateway.