检测到您已登录华为云国际站账号,为了您更好的体验,建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
Figure 1 Specifying the number of allocatable container IP addresses on a node in the VPC network model By default, a node occupies three container IP addresses (network address, gateway address, and broadcast address).
For CBH to access resources it manages, configure the security group rules for resources such as ECSs and RDS DB instances to enable the necessary gateway IP address and port and allow the private IP address of CBH. For details, see ECS Security Group Configuration.
editor. auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet dhcp If static IP addresses are set on the NICs, go to 2. auto lo iface lo inet loopback auto eth0 #iface eth0 inet dhcp iface eth0 inet static address 192.168.1.109 netmask 255.255.255.0 gateway
The source and destination addresses must be private IP addresses. 2: NAT rule.
Provision Subnet Gateway IP Yes Subnet gateway IP address of the Provision plane of the iMetal server. Boot Mode Yes Boot mode of the iMetal server, which can be BIOS or UEFI. BIOS is used by default.
The subnet mask cannot be greater than 28. gateway_ip String Specifies the gateway of the subnet. The value must be an IP address in the subnet.
This parameter is available only when you create a VPC endpoint for connecting to an interface VPC endpoint service. policy_statement Array of PolicyStatement objects Specifies the policy of the gateway VPC endpoint.
Supported protocols: HTTP/HTTPS/QUIC ≥ 0 Count/s N/A Dedicated load balancer 1 minute m13_l7_http_502 502 Bad Gateway (Total) The number of 502 Bad Gateway status codes returned by the monitored object and backend servers per second at Layer 7.
Table 10 ForwardingInfo Parameter Type Description eip String Parameter description: EIP bound to the NAT gateway. enable_snat Boolean Parameter description: whether to enable the SNAT configuration. Options: true false Example Requests Querying an instance.
attachment vpn: VPN gateway attachment peering: peering connection attachment.
attachment vpn: VPN gateway attachment peering: peering connection attachment.
tags Table 1 Path Parameters Parameter Mandatory Type Description project_id Yes String Project ID resource_id Yes String Resource ID resource_type Yes String Resource type. instance: enterprise router route-table: route table vpc-attachment: VPC attachment vgw-attachment: virtual gateway
attachment vpn: VPN gateway attachment peering: peering connection attachment.
attachment vgw: virtual gateway attachment peering: peering connection attachment.
attachment vgw: virtual gateway attachment peering: peering connection attachment.
to the platform, upload the device information to bind the device or gateway to the platform.
Table 5 DirectedEdge Parameter Type Description id String Instance ID. region_id String Region ID. gateway_id String Gateway ID. gateway_type String Gateway type. GDGW indicates global DC gateways. site_code String Site code. project_id String Project ID.
Error Codes OCR is deployed on ModelArts and uses API Gateway (APIG). Therefore, OCR error codes may start with ModelArts, APIGW, or APIG. If an error code starting with APIGW is returned after you call an API, rectify the fault by referring to Error Codes.
If sticky session is enabled and the load balancer receives no response from the backend server within the response timeout duration, the load balancer returns a 504 Gateway Timeout error to the client directly. The response timeout duration ranges from 1 to 300.
There are two types of VPC endpoint services: interface and gateway. gateway: indicates the VPC endpoint services that are configured by the O&M personnel.