检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
P-T P-T Remote Gateway A remote gateway is the public IP address of the physical device on the peer end in an IPsec VPN tunnel. The remote gateway of each IPsec VPN tunnel must be unique. Remote Subnet A remote subnet is the destination IP addresses reachable through the tunnel.
P-T P-T Remote Gateway A remote gateway is the public IP address of the physical device on the peer end in an IPsec VPN tunnel. The remote gateway of each IPsec VPN tunnel must be unique. Remote Subnet A remote subnet is the destination IP addresses reachable through the tunnel.
Subnet gateway: In the Gateway and DNS Information area, check the gateway address.
RDS DB instance: RDS Documentation CCE instance: CCE Documentation API gateway: API Gateway Documentation Figure 1 Scenario 1: Virtual IP address cannot be released Figure 2 Scenario 2: Virtual IP address cannot be released Procedure Go to the subnet list page.
of Active/Standby Direct Connect Connections (Global DC Gateway) Setting Up a Hybrid Cloud Network Using Enterprise Router, VPN, and Direct Connect (Global DC Gateway) In Figure 4, some workloads are running in two VPCs (VPC-A and VPC-B) in a region, and some workloads are running
NOTE: When you add or modify a custom route in a default route table, the next hop type of the route cannot be set to VPN gateway, Direct Connect gateway, or Cloud connection. VPC peering connection Next Hop Mandatory Set the next hop.
In the displayed area, enter the IP address, subnet mask, and the default gateway address. Checking ECS Logs Check the ECS messages log in the /var/log/messages directory.
Edge gateway An edge gateway can connect subnets in the same VPC but from both HomeZones and central AZs. For more information, see Edge Gateway Overview.
For example, in subnet 10.0.0.0/24, 10.0.0.1 is the gateway address, 10.0.0.253 is the system interface address, 10.0.0.254 is used by DHCP, and 10.0.0.255 is the broadcast address. The subnet CIDR block cannot be too large, either.
NOTE: When you add or modify a custom route in a default route table, the next hop type of the route cannot be set to VPN gateway, Direct Connect gateway, or Cloud connection. VPC peering connection Next Hop Mandatory Set the next hop.
VPC Free Subnet Free Route table Free VPC peering connection Free Elastic network interface Free Supplementary network interface Free IP address group Free Security group Free Network ACL Free Edge gateway Free VPC flow log Free Traffic Mirroring Free Currently, free resources are
VPC Free Subnet Free Route table Free VPC peering connection Free Elastic network interface Free Supplementary network interface Free IP address group Free Security group Free Network ACL Free Edge gateway Free VPC flow log Free Traffic Mirroring Free Currently, free resources are
Virtual IP addresses Private IP addresses Used by the subnet itself, such as the gateway, DHCP, and system interface. Used by cloud resources, such as ECSs, RDS instances, and load balancers. Constraints A subnet cannot be deleted if its IP addresses are used by cloud resources.
Table 1 Windows ECSs using IPv4 addresses Type Primary Network Interface Extended Network Interface Source IPv4 address: 10.0.0.59 Subnet IPv4 gateway: 10.0.0.1 IPv4 address: 10.0.1.104 Subnet IPv4 gateway: 10.0.1.1 Destination IPv4 address: 10.0.2.12 N/A Log in to the source ECS.
This address is the beginning of the private IP address range and will not be assigned to any instance. 192.168.0.1: The gateway address of the subnet. 192.168.0.253: Reserved for the system interface.
This parameter cannot be set if the value of ip_version is 6. gateway_ip No String The gateway IP address cannot conflict with IP addresses configured for allocation_pools.
In the Gateway and DNS Information area, view the DNS server addresses used by the ECS.
Use the gateway IP address of the subnet to create a router interface. port_id String No Specifies the port ID. Either subnet_id or port_id is used. Use the port IP address to create a router interface. Example Request Remove an interface from a router.
N/A Advanced Settings (Optional) > Gateway Click to expand the configuration area and set this parameter. The gateway address of the subnet.
This parameter cannot be set if the value of ip_version is 6. gateway_ip String The gateway IP address cannot conflict with IP addresses configured for allocation_pools.
