检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
How Do I Establish a VPN Connection Temporarily If No IPsec-Capable On-Premises Device Is Available After I Purchase a VPN Gateway and VPN Connection?
As the Huawei Cloud VPN gateway has two EIPs bound, you need to configure two peers. Select the phase-1 proposal created in c from the Proposal1 drop-down list box. Click Advanced Configuration, toggle on NAT Traversal and DPD, and click OK.
Do I Need to Configure ACL Rules on the Console After I Configure ACL Rules on the On-premises Gateway Device? You need to configure policy rules (ACL rules) for a VPN connection on the management console only when VPN Type is set to Policy-based.
Contact technical support. 48 nat detection fail NAT detection fails. Contact technical support. 49 fragment packet limit The number of fragments exceeds the upper limit. Contact technical support. 50 fragment packet reassemble timeout Fragment reassembly times out.
Can Pay-per-Use EIPs Be Bound to a Yearly/Monthly VPN Gateway? What About EIPs Using a Shared Data Package? Both pay-per-use EIPs and EIPs using a shared data package can be bound to yearly/monthly VPN gateways.
The name of a VPN gateway can contain only letters, digits, underscores (_), hyphens (-), and periods (.). Click OK. Parent topic: Classic VPN Connection Management
You can view the IPsec VPN tunnel information on the VPN gateway in the on-premises data center. The method of checking the IPsec VPN tunnel information varies according to the VPN device models. Parent topic: Procedure (Manual)
Your purchased VPN gateway bandwidth applies to the outbound direction of the cloud.
Your purchased VPN gateway bandwidth applies to the outbound direction of the cloud.
Your purchased VPN gateway bandwidth applies to the outbound direction of the cloud.
Your purchased VPN gateway bandwidth applies to the outbound direction of the cloud. To achieve a balance between bandwidths in the inbound and outbound directions, the bandwidth in the inbound direction is limited.
Your purchased VPN gateway bandwidth applies to the outbound direction of the cloud. To achieve a balance between bandwidths in the inbound and outbound directions, the bandwidth in the inbound direction is limited.
Your purchased VPN gateway bandwidth applies to the outbound direction of the cloud.
Scenario Figure 1 shows the typical networking where a Huawei Cloud VPN gateway connects to a Hillstone firewall in an on-premises data center in policy-based mode.
A VPN gateway can be billed on a pay-per-use or yearly/monthly basis. The billing modes available for a region are subject to those displayed on the page. Pay-per-use: Fees are deducted from the account balance based on the resource usage.
A Client Cannot Ping the Private IP Address of an ECS Symptom A client is connected to a P2C VPN gateway, but cannot ping the private IP address of an ECS. Possible Causes Ping detection is disabled on the client device or ECS.
After a P2C VPN gateway is created, you need to complete the server configuration for it. Prerequisites The VPN gateway where a server is to be deployed has been created. Limitations and Constraints You can configure a server only when the VPN gateway is in Normal state.
If the system displays a message indicating that you do not have the permissions to create a VPN gateway or VPN connection, add the required permissions. For details about the permissions required for using the VPN service, see IAM-based Permissions Management.
NAT configuration: Do not perform NAT on the on-premises subnet that is used to access the cloud.
Data Plan Table 1 Data plan Category Item Example Value for the Huawei USG Firewall Example Value for the Huawei Cloud Side VPC Subnet 172.16.0.0/24 192.168.0.0/24 VPN gateway Gateway IP address 1.1.1.1 Active EIP: 1.1.1.2 Standby EIP: 2.2.2.2 Interconnection subnet - 192.168.2.0/
