检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
Step 2: Create a Virtual Gateway Create a virtual gateway and associate it with the VPC that you need to access. Step 3: Create a Virtual Interface After the connection and the gateway are ready, create a virtual interface so that your on-premises network can access the VPC.
Each connection has at least a virtual gateway and a virtual interface, and their routes are automatically advertised. Connections in most regions are automated connections. Historical connections are requested by email or phone.
gateway and that the VLAN of the intermediate device on the physical network is correctly configured.
gateway and that the VLAN of the intermediate device on the physical network is correctly configured.
User Guide Modifying a Connection Deleting a Virtual Gateway Modifying a Virtual Interface 02 Start Learn how to configure Direct Connect to set up a hybrid cloud network.
Your device must support Border Gateway Protocol (BGP) and BGP MD5 authentication or static routing. (Optional) You can configure Bidirectional Forwarding Detection (BFD) on the network.
Your device must support Border Gateway Protocol (BGP) and BGP MD5 authentication or static routing. (Optional) You can configure Bidirectional Forwarding Detection (BFD) on the network.
Your device must support Border Gateway Protocol (BGP) and BGP MD5 authentication or static routing. (Optional) You can configure Bidirectional Forwarding Detection (BFD) on the network.
Number of local subnets for a virtual gateway 50 Increasing the quota is not allowed. Number of routes for BGP sessions on a virtual interface 100 Submit a service ticket. Number of remote subnets for a virtual interface 50 Submit a service ticket.
API Connections Virtual Gateways Virtual Interfaces Tag Management Quota Management Global DC Gateways Peer Links Connect Gateways Global EIPs Global DC Gateway Route Tables
Using Direct Connect to Connect an On-Premises Data Center to the Cloud Solution Overview Preparations Step 1: Create a Connection Step 2: Create a Virtual Gateway Step 3: Create a Virtual Interface Step 4: Configure Routes
For example, if the peer gateway is an enterprise router, this parameter is set to the attachment ID. If the peer gateway is a global DC gateway, this parameter is set to the peer link ID. Minimum: 0 Maximum: 64 region_id String Specifies the region ID of the peer site.
Routing If a static route has been delivered to a virtual interface or a BGP peer relationship has been established, perform the following steps to locate the fault: Verify that the route from your gateway to your network is reachable.
Routing If a static route has been delivered to a virtual interface or a BGP peer relationship has been established, perform the following steps to locate the fault: Verify that the route from your gateway to your network is reachable.
Do I Need to Delete the Virtual Gateway and Virtual Interface Before Deleting a Hosted Connection? How Do I Change the Routing Mode of a Connection? How Do I Delete a Hosted Connection? What Is the BGP ASN Used by Huawei Cloud?
Maximum: 36 service_type String Specifies the gateway type. The value can be VGW, GDGW, or LGW. This parameter cannot be configured if a virtual gateway is used. Enumeration values: VGW GDGW LGW status String Specifies the operating status.
For example, if the peer gateway is an enterprise router, this parameter is set to the attachment ID. If the peer gateway is a global DC gateway, this parameter is set to the peer link ID. Minimum: 0 Maximum: 64 region_id String Specifies the region ID of the peer site.
Array length: 0–10 local_gateway_v4_ip String Specifies the IPv4 interface address of the gateway used on the cloud.
Maximum: 36 service_type String Specifies the gateway type. The value can be VGW, GDGW, or LGW. This parameter cannot be configured if a virtual gateway is used. Enumeration values: VGW GDGW LGW status String Specifies the operating status.
Each connection has at least a virtual gateway and a virtual interface, and their routes are automatically advertised. Connections in most regions are automated connections. Historical connections are requested by email or phone.
