检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
Array Length: 0 - 10 local_gateway_v4_ip String Specifies the IPv4 interface address of the gateway used on the cloud.
Array Length: 0 - 10 local_gateway_v4_ip String Specifies the IPv4 interface address of the gateway used on the cloud.
After the connection is ready, you need to create a virtual gateway and associate it with the VPC you want to access on the Virtual Gateways page.
After the connection is ready, you need to create a virtual gateway and associate it with the VPC you want to access on the Virtual Gateways page.
Array Length: 0 - 10 local_gateway_v4_ip String Specifies the IPv4 interface address of the gateway used on the cloud.
Prerequisites Delete the virtual gateway and virtual interface associated with your connection, delete the connection, and unsubscribe from the operations connection. Procedure Go to the Connections page.
Acceptance criteria: No packets are lost when 5,000 1,400-byte packets are sent from your CE device to the Direct Connect gateway used at the location you selected. The bit error rate (BER) of ports does not exceed ten to the negative seventh power (10-7).
Acceptance criteria: No packets are lost when your CE device is pinged from the Direct Connect gateway in the data center at the location you selected and 5000 packets are sent with each containing 1400 bytes.
Example Custom Policies Example 1: Allowing users to update a virtual gateway { "Version": "1.1", "Statement": [ { "Effect": "Allow", "Action": [ "dcaas:vgw:update" ] } ] } Example 2: Denying users to
Direct Connect supports the following actions that can be defined in custom policies: Virtual Gateways: contains actions supported by the APIs of Direct Connect virtual gateway, such as creating a virtual gateway.
and used quota peerLinkPerGdgw: peer link quota for a global DC gateway and used quota Request Parameters None Response Parameters Status code: 201 Table 3 Response body parameters Parameter Type Description quotas quotas object Provides used quota details.
When creating the virtual gateway, select VPC A and add the CIDR block of VPC B to the local subnet. Create a virtual interface. Create a VPC peering connection between VPC A and VPC B. Log in to the management console.
An External Border Gateway Protocol (EBGP) connection is established between RouterA and RouterB. BFD monitors the status of the EBGP connection. When the link between RouterA and RouterB becomes faulty, BFD can quickly detect the fault and notify BGP.
Packet N/A direct_connect_id 1 minute network_status Port Status The status of the port used by a connection 0 indicates DOWN. 1-UP N/A N/A direct_connect_id 1 minute in_errors Inbound Error Packets The number of inbound packets that could not be transmitted to the Direct Connect gateway
gateway address of the virtual interface peer. route_mode No String Specifies the routing mode, which can be static or bgp.
Minimum: 0 Maximum: 36 resource_id Yes String Specifies the resource ID. resource_type Yes String Specifies the Direct Connect resource type. dc-directconnect: connection dc-vgw: virtual gateway dc-vif: virtual interface Request Parameters None Response Parameters Status code: 204
Minimum: 0 Maximum: 36 resource_type Yes String Specifies the Direct Connect resource type. dc-directconnect: connection dc-vgw: virtual gateway dc-vif: virtual interface Request Parameters None Response Parameters Status code: 200 Table 2 Response body parameters Parameter Type Description
Minimum: 0 Maximum: 36 resource_type Yes String Specifies the Direct Connect resource type. dc-directconnect: connection dc-vgw: virtual gateway dc-vif: virtual interface resource_id Yes String Specifies the resource ID.
Minimum: 0 Maximum: 36 resource_id Yes String Specifies the resource ID. resource_type Yes String Specifies the Direct Connect resource type. dc-directconnect: connection dc-vgw: virtual gateway dc-vif: virtual interface Request Parameters Table 2 Request body parameters Parameter
to custom billing policies such as duration-based packages. period_type Integer Specifies whether a connection in a specified order is billed by year or month. period_num Integer Specifies the required service duration of a yearly/monthly connection. vgw_type String Specifies the gateway
