检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
You are not advised to use a temporary ECS as a normal ECS because it has limited functionality. For example, disks cannot be attached to it.
In the ECS list, select the target ECSs. Click Restart in the upper left corner of the list. After an ECS is forcibly restarted, unsaved data on the ECS will be lost. Click OK to restart the selected ECSs.
How Can I Automatically Renew a Yearly/Monthly ECS? Solution Select Auto renew when purchasing a yearly/monthly ECS. On the Buy ECS page, select Auto renew under Required Duration. Figure 1 Auto renew Select the EIP bound to the target ECS for automatic renewal.
What Do I Do If I Selected an Incorrect Image for My ECS? You can change the image for your ECS on the ECS console. Select the target ECS and click Stop in the upper left corner of the ECS list.
Figure 2 A locked file Procedure (Windows) Go to the ECS console and log in to the ECS running Windows Server 2012. Click This PC in the lower left corner. On the page that is displayed, right-click Network and choose Properties from the drop-down list.
After the ECS is purchased, add the inbound rule listed in the following table to the security group which the ECS belongs to. For details, see Adding a Security Group Rule.
What Should I Do If I Cannot Switch to an ECS or HANA ECS Using SSH? Symptom When I switched from a Linux ECS/HANA ECS to another Linux ECS/HANA ECS using SSH, the system displayed a message indicating the switching failed.
Deploying an ECS for Handling Text Messages from an Official WeChat Account Overview The best practices for Huawei Cloud ECS guide you through the deployment of an ECS as an official WeChat account server so that the ECS receives text messages from the WeChat server and sends processing
DHCP is enabled in the VPC which the ECS belongs to. The ECS network connectivity is normal. The NIC has been set to DHCP so that the ECS can dynamically obtain an IP address. For details about how to set the NIC to DHCP for a Linux ECS, see Setting the NIC to DHCP.
How Do I Install IIS on a Windows ECS? Scenarios This section describes how to install IIS on an ECS running Windows Server 2012 R2 Standard. Only the procedure for installing IIS will be described. The procedure for installing applications is subject to actual requirements.
What Should I Do If I Cannot Switch to an ECS or HANA ECS Using SSH? Symptom When I switched from a Linux ECS/HANA ECS to another Linux ECS/HANA ECS using SSH, the system displayed a message indicating the switching failed.
How Can I Obtain the MAC Address of My ECS? This section describes how to obtain the MAC address of an ECS. The MAC address of an ECS cannot be changed. Linux (CentOS 6) Log in to the Linux ECS.
For configuration examples, see Remotely Logging In to an ECS from a Local Server. For details about how to log in to a Windows ECS, see Windows ECS Login Overview. 8080 Proxy Used by the WWW proxy service for web browsing, like port 80.
O Extreme SSD Ultra-high packets per second (PPS) throughput An ECS with higher specifications has better network performance.
For details about how to create an ECS, see Purchasing an ECS in Custom Config Mode.
In the recycle bin list, locate the ECS to be recovered and click Recover in the Operation column. The Recover ECS page is displayed. Click Submit. If the recovery is successful, the ECS is displayed in the ECS list and the ECS status is Running.
For more information, see Table 4. mode No String Specifies whether the ECS supports OS reinstallation when the ECS is running. If the parameter value is withStopServer, the ECS supports OS reinstallation when the ECS is running.
Prerequisites An ECS has been created successfully and an EIP has been bound to it. Procedure Use PuTTY and a key pair to log in to an ECS in the cluster.
Prerequisites An ECS has been created successfully and an EIP has been bound to it. Procedure Use PuTTY and a key pair to log in to an ECS in the cluster.
For more information, see Table 4. mode No String Specifies whether the ECS supports OS change when the ECS is running. If the parameter value is withStopServer, the ECS supports this feature. The system automatically stops the ECS and then changes its OS.
