检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
检测到您已登录华为云国际站账号，为了您更好的体验，建议您访问国际站服务网站 https://www.huaweicloud.com/intl/zh-cn
不再显示此消息
Table 9 ECS details ECS Name Image VPC Subnet Security Group Private IP Address ECS 1: ecs-business-01 Public image: CentOS 7.5 64-bit vpc-business-01 subnet-business-01 sg-demo (general-purpose web server) 10.1.0.134 ECS 2: ecs-business-02 vpc-business-02 subnet-business-02 10.2.0.215
Create an ECS in each verification subnet. Log in to the ECS and use ping to verify communications between the VPCs and enterprise router. Step 2: Create VPC Attachments and Add Routes Create VPC attachments to attach the three VPCs to the enterprise router.
Step 4: Verify Network Connectivity Log in to each ECS and use ping to verify connectivity. Parent topic: Setting Up a Hybrid Cloud Network Using Enterprise Router and Direct Connect Global DC Gateway
Configure kernel parameters and routes for ECS 3 to allow communications between NICs eth0 and eth1. 4 Verifying Network Connectivity and Traffic Scrubbing Log in to an ECS and run the ping command to verify the network connectivity.
Create an ECS in the VPC subnet that needs to communicate with the on-premises data center, log in to the ECS, and run the ping command. Delete the route and ECS used for verifying communications.
Configuring Networks Creating VPC Attachments for the Enterprise Router Configuring Kernel Parameters and Routes for ECS 3 Parent topic: Using a Third-Party Firewall to Protect VPCs Connected by Enterprise Routers
in each VPC, a total of four ECSs Table 7 ECS details ECS Image VPC Subnet Security Group Private IP Address ecs-demo-01 Public image: EulerOS 2.5 6 vpc-demo-01 subnet-demo-01 sg-demo (general-purpose web server) 192.168.1.12 ecs-demo-02 vpc-demo-02 subnet-demo-02 172.16.1.189 ecs-demo
During migration After migration ECS 3 Create an ECS in each VPC to verify network connectivity. Name: Set it based on site requirements. In this example, the names are as follows: Region A: ECS-A Region B: ECS-B Region C: ECS-C Image: Select an image based on site requirements.
Step 5: Verify Network Connectivity Between the Service VPCs and On-Premises Data Center Log in to an ECS and run the ping command to verify the network connectivity.
web server) This ECS is used to run workloads.
Log in to the ECS and run the ping command to verify connectivity. Establish connectivity using the other connection and verify connectivity.
Verify the network connectivity between VPCs. ping IP address of the ECS Use ECS-A as an example to verify the network connectivity between VPC-A and VPC-B: ping 192.168.0.5 If information similar to the following is displayed, the communications between VPC-A and VPC-B are normal
Public services, such as Elastic Cloud Server (ECS), Elastic Volume Service (EVS), Object Storage Service (OBS), Virtual Private Cloud (VPC), Elastic IP (EIP), and Image Management Service (IMS), are shared within the same region.
Create an ECS in the subnet of the service VPC. Step 2: Attach the VPC to the Enterprise Router Attach the service VPC to the enterprise router.
Public services, such as Elastic Cloud Server (ECS), Elastic Volume Service (EVS), Object Storage Service (OBS), Virtual Private Cloud (VPC), Elastic IP (EIP), and Image Management Service (IMS), are shared within the same region.
Log in to the ECS and run the ping command to verify connectivity. Establish connectivity using the other connection and verify connectivity. For details, see 1.
Verify the network connectivity between VPCs. ping IP address of the ECS To verify whether vpc-business-01 can communicate with vpc-business-02 and vpc-business-03, log in to ecs-business-01 and run the following commands: ping 10.2.0.215 ping 10.3.0.14 If information similar to the
ECS 1 An ECS is required to verify connectivity. ECS Name: Set it based on site requirements. In this example, ECS-A is used. Image: Select an image based on site requirements. In this example, a public image (CentOS 8.2 64bit) is used. Network VPC: Select the service VPC.
ECS 1 An ECS is required to verify connectivity. ECS Name: Set it based on site requirements. In this example, ECS-A is used. Image: Select an image based on site requirements. In this example, a public image (CentOS 8.2 64bit) is used. Network VPC: Select the service VPC.
ECS 1 An ECS is required in the VPC for verifying connectivity. ECS Name: Set it based on site requirements. In this example, ecs-A is used. Image: Select an image based on site requirements. In this example, a public image (CentOS 8.2 64bit) is used.
